2016-12-29
Switch to English1、散熱器在供暖初期，由于系統壓力與流量不足，會產生響聲，屬正常情況，待系統水量注滿后，響聲即會消失?；蛘哒{節散熱器出水口閥門，減少出水流量，待散熱器水量注滿后，響聲即會消失，此時可將散熱器出水口閥門開啟到正常位置。
2、散熱器在供暖期間，系統管道會存在空氣，影響散熱。此時，應用工具將堵頭跑風螺釘擰松，使散熱器內空氣排出，待水流出時，即可旋緊跑風螺釘。
3、散熱器內腔存水結冰可導致散熱器變形或焊縫撕裂，因此，若采暖系統不運行或用戶將入戶的閥門或散熱器上的閥門關斷，散熱器內的水會在室溫低于0℃時結冰，散熱器會被凍壞。
4、散熱器不得任意拆卸，使用時防止磕碰、重壓、敲打。
1.the radiator in the early heating, due to lack of system pressure and flow, will produce a sound, is a normal situation, until the system is full of water, the sound that will disappear. Or adjust the radiator outlet valve to reduce the water flow, until the radiator filled with water, the sound will disappear, then the radiator outlet valve can be opened to the normal position.
2.the radiator in the heating period, the system will exist in the air pipe, cooling effect. At this point, the application tool will plug the running wind screw loose, so that the air inside the radiator to be out of the water, you can tighten the running wind screw.
3.the radiator cavity water ice can lead to deformation of the radiator or weld tear, therefore, if the heating system is not running or the user will be home to the valve or radiator valve off, radiator water will In the room temperature below 0 ℃ when the ice, the radiator will be frozen.
4.the radiator shall not be any disassembly, to prevent the use of bump, weight, beat.
上一個：暖氣片如何保養
下一個：暖氣片安裝的有哪些注意事項？
