2016-12-29
Switch to English1、單管順流式也稱串聯式
優點:施工簡單、管道材料省,造價低。
缺點:不能單獨控制,越到后面的暖氣片供水溫度越低。只適合在一個空間里布置,建議超過3組不采用該連接方式。
2、雙管并聯異程式
優點:施工方便,相對節約管材,可以分室獨立控制。
缺點:每組暖氣片水力不均,需要進行壓力平衡調節,建議8組暖氣片以上使用,供水壓力不夠時需要增加增壓泵。
3、雙管并聯同程式
優點:管道熱量損耗小、加熱速度快。每組暖氣片供水溫度一致,完全實現分室獨立控制,流量調節方便。
缺點:相比一城管道材料用量大,造價略高。
4、章魚式
優點:通過分集水器分支到各房間的每組暖氣片,采用的是整管,地下無接頭在后續裝修過程中無人為損壞,不會漏水,安全。便于調節每組暖氣片的流量平衡每個房間可單獨控制,維修調試方便。
缺點:管道太多,施工復雜(不便于需要施工地龍骨的實木地板安裝)
1.Single-tube downstream also known as tandem
Advantages: simple construction, pipe material province, low cost.
Disadvantages: can not be individually controlled, more to the back of the radiator the lower the water temperature. Only fit in a space layout, it is recommended that more than three groups do not use the connection.
2.Two - pipe Parallel Split Equation
Advantages: easy construction, the relative savings in pipe, can be sub-room independent control.
Disadvantages: uneven heating of each group of water, the need for pressure balance adjustment, the proposed group 8 above the use of radiators, water pressure is not enough to increase the booster pump.
3.Double pipe parallel with the program
Advantages: Pipeline heat loss is small, fast heating. Each group of radiator water supply temperature is the same, the full realization of sub-room independent control, flow control convenience.
Disadvantages: compared to a city with large amount of pipe materials, cost slightly higher.
n of sub-room independent control, flow control convenience.4.Octopus type
Advantages: Through the sub-catchment branch to each room of each group radiator, using the whole tube, underground joints in the subsequent renovation process without damage, no leakage, and security. Easy to adjust the flow of each group of radiator balance Each room can be individually controlled, easy maintenance and debugging.
Disadvantages: too many pipes, the construction of complex (not easy to need to build the keel of the solid wood floor installation)
下一個:裝地暖用什么地板好?