2016-12-29
Switch to English1、散熱器主體局部不熱：
主要集中在下進下出的安裝方式上，原因為散熱器內部有氣體不能排出。
解決方式為將排氣閥開啟，將散熱器內部氣體排出。
或檢查系統是否壓力過小或流量過低。
2、散熱器整體不熱：
下進下出的安裝方式，檢查散熱器安裝時是否將導流閥上下位置安裝顛倒；
上進下出的安裝方式，檢查散熱器安裝時是否未將流閥開啟?；蛘呤窍到y否存在問題。
3、散熱器有水聲：
主要集中在上進下出的安裝方式上，原因為散熱器內部有氣體不能排出。
解決方式為將散熱器供水閥門關閉，將排起閥開啟，將散熱器內部氣體排出，
關閉排氣閥，將供水閥門開啟即可。
如不能排除應檢查系統是否流量過低或系統循環水含氣量過大。
4、散熱器震動：
檢查散熱器掛件是否松動，如掛件未松動應檢查系統上是否存在震源導致散熱器共振。
1.Radiator body is not hot:
Mainly concentrated in the next way into the next installation, the reason for the radiator inside the gas can not be discharged.
The solution is to open the exhaust valve, the radiator internal gas discharge.
Or check the system is too low pressure or flow is too low.
2.Radiator as a whole is not hot:
Down into the next installation, check whether the installation of the radiator up and down position of the diversion valve installed upside down;
Up and down the installation method, check whether the installation of the radiator flow valve is not open. Or whether there is a problem with the system.
3.Radiator sound of water:
Mainly in the upper and lower out of the installation, the reason for the radiator inside the gas can not be discharged.
The solution is to close the radiator water supply valve, the discharge valve will open, the radiator internal gas discharge,
Close the exhaust valve, the water supply valve can be opened.
If you can not rule out the system should check whether the flow is too low or the system circulating water gas content is too large.
4.Radiator vibration
Check the radiator pendant is loose, such as the pendant is not loose should check the system on whether there is a source of heat sink resonance.
